126 research outputs found
Recommended from our members
Carbon Dioxide Plume Evolution Following Injection into a Depleted Natural Gas Reservoir: Modeling of Conformance Uncertainty Reduction Over Time
The uncertainty in the long-term fate of CO2 injected for geologic carbon sequestration (GCS) is a significant barrier to the adoption of GCS as a greenhouse gas emission mitigation approach for industry and regulatory agencies alike. Here we present a modeling study that demonstrates that the uncertainty in forecasts of GCS site performance decreases over time as monitoring data are used to inform and update operational models. The approach we take is to consider a case study consisting of a depleted natural gas reservoir that is used for GCS with CO2 injection occurring over 20 years, with a 50-year post-injection site care (PISC) period. We constructed a detailed model of the system and ran this model out to 200 years to generate the actual site data. A series of simpler operational models based on limited data and assumptions about how an actual operator would model such a site are then run and compared against the actual model output at various specific monitoring points after one year, two years, etc. The operational model is then updated and improved using the observations (synthetic data from the actual model) at the same time intervals. We found that both model parameter values and model features needed to be added over time to improve matches to the actual system. These kinds of model adjustments are expected to be a normal part of reservoir engineering and site management at GCS sites. We found that the uncertainty in two key measures related to site performance at various locations decreases with time. This overall conclusion should help allay the concerns of industry and regulators about the uncertainty in GCS operations
A comparative study of a heat and fluid flow problem using three models of different levels of sophistication
AbstractThree mathematical models of different levels of sophistication have been used to study a practical problem on underground heat and fluid flow, associated with the seasonal storage of hot water in an aquifer. A number of scenarios have been examined using the three models. For the basic problem the three models yield similar results, so use of the simplest is preferred. For several variations on the problem, only the more complicated models are adequate to properly address the problem. In general, the choice of an appropriate model is very problem-specific and requires not only experience with modelling methods, but also an understanding of the physics of the problem
Recommended from our members
Capacity investigation of brine-bearing sands of the Frio Formation for geologic sequestration of CO2
The capacity of fluvial brine-bearing formations to sequester CO2 is investigated using numerical simulations of CO2 injection and storage. Capacity is defined as the volume fraction of the subsurface available for CO2 storage and is conceptualized as a product of factors that account for two-phase flow and transport processes, formation geometry, formation heterogeneity, and formation porosity. The space and time domains used to define capacity must be chosen with care to obtain meaningful results, especially when comparing different authors’ work. Physical factors that impact capacity include permeability anisotropy and relative permeability to CO2, brine/CO2 density and viscosity ratios, the shape of the trapping structure, formation porosity and the presence of low permeability layering.National Energy Technology LaboratoryBureau of Economic Geolog
Recommended from our members
Chaotic-Dynamical Conceptual Model to Describe Fluid Flow and Contaminant Transport in a Fractured Vadose Zone
DOE faces the remediation of numerous contaminated sites, such as those at Hanford, INEEL, LLNL, and LBNL, where organic and/or radioactive wastes were intentionally or accidentally released to the vadose zone from surface spills, underground tanks, cribs, shallow ponds, and deep wells. Migration of these contaminants through the vadose zone has led to the contamination of (or threatens to contaminate) underlying groundwater. A key issue in choosing a corrective action plan to clean up contaminated sites is the determination of the location, total mass, mobility and travel time to receptors for contaminants moving in the vadose zone. These problems are difficult to solve in a technically defensible and accurate manner because contaminants travel downward intermittently, through narrow pathways, driven by variations in environmental conditions. These preferential flow pathways can be difficult to find and predict. The primary objective of this project is to determine if and when dynamical chaos theory can be used to investigate infiltration of fluid and contaminant transport in heterogeneous soils and fractured rocks. The objective of this project is being achieved through the following activities: Development of multi scale conceptual models and mathematical and numerical algorithms for flow and transport, which incorporate both (a) the spatial variability of heterogeneous porous and fractured media and (b) the temporal dynamics of flow and transport; Development of appropriate experimental field and laboratory techniques needed to detect diagnostic parameters for chaotic behavior of flow; Evaluation of chaotic behavior of flow in laboratory and field experiments using methods from non-linear dynamics; Evaluation of the impact these dynamics may have on contaminant transport through heterogeneous fractured rocks and soils and remediation efforts. This approach is based on the consideration of multi scale spatial heterogeneity and flow phenomena that are affected by nonlinear dynamics, and in particular, chaotic processes. The scientific and practical value of this approach is that we can predict the range within, which the parameters of flow and transport change with time, which allows us to design and manage the remediation even when we cannot predict the behavior at any point or time
Recommended from our members
A Chaotic-Dynamical Conceptual Model to Describe Fluid flow and Contaminant Transport in a Fractured Vadose zone
(1) To determine if and when dynamical chaos theory can be used to investigate infiltration of fluid and contaminant transport in heterogeneous soils and fractured rocks. (2) To introduce a new approach to the multiscale characterization of flow and transport in fractured basalt vadose zones and to develop physically based conceptual models on a hierarchy of scales. The following activities are indicative of the success in meeting the project s objectives: A series of ponded infiltration tests, including (1) small-scale infiltration tests (ponded area 0.5 m2) conducted at the Hell s Half Acre site near Shelley, Idaho, and (2) intermediate-scale infiltration tests (ponded area 56 m2) conducted at the Box Canyon site near Arco, Idaho. Laboratory investigations and modeling of flow in a fractured basalt core. A series of small-scale dripping experiments in fracture models. Evaluation of chaotic behavior of flow in laboratory and field experiments using methods from nonlinear dynamics; Evaluation of the impact these dynamics may have on contaminant transport through heterogeneous fractured rocks and soils, and how it can be used to guide remediation efforts; Development of a conceptual model and mathematical and numerical algorithms for flow and transport that incorporate (1) the spatial variability of heterogeneous porous and fractured media, and (2) the description of the temporal dynamics of flow and transport, both of which may be chaotic. Development of appropriate experimental field and laboratory techniques needed to detect diagnostic parameters for chaotic behavior of flow. This approach is based on the assumption that spatial heterogeneity and flow phenomena are affected by nonlinear dynamics, and in particular, by chaotic processes. The scientific and practical value of this approach is that we can predict the range within which the parameters of flow and transport change with time in order to design and manage the remediation, even when we can not predict the behavior at any point or time
- …